Inspecting stone sample panels
Selecting the correct stone is arguably the most important part of a project and presents the best opportunity for avoiding potential problems in the future. This article considers the specific but important issue of what to look for in a stone sample panel. While this may seem like a very niche topic, it affects much of the selection process and so deserves more in depth discussion.
The mine or quarry that stone is sourced from should have range/control panels showing the geological characteristics typically found in the various beds available (shown below). This provides the customer with the truest indication of the variation they can expect to find in stone from the bed they are using. This is vital to the effective management of customer expectations as stone is a natural material and not every piece will look the same. If this is understood then the unique aesthetic that natural stone provides can be celebrated and built into the design rather than cause tensions between the quarry and the customer.
Ultimately it is the quarry or mine’s responsibility to select a suitable number of samples from the chosen bed to show the typical range of geological variations that are present, but if the production company has already been and selected the stones and the blocks are all in stock and available for a pre-purchase, then this can be completed at their works instead.
Inspection should take place at the extraction site, but if this is not possible, then confirmation that the quarry has been closely consulted in the sample selection must be sought.
The range/control panels from the different quarries and beds should be carefully inspected and then the final selection made and high resolution photographs taken for future reference.
The rejection of geological characteristics naturally found in the stone will typically result in increased costs and prolonged procurement through abortive cutting and will increase wastage and carbon footprint and so the overall sustainability of the supply.
Any comparison between the range/control samples and the actual production should be carried out in normal daylight for external stone work or perhaps similar light conditions to the project for internal works. Wherever possible, samples should be viewed from a distance of 2m as stated in all the relevant British Standards and in the orientation in which the stone will be used.
--Stone Federation Great Britain
[edit] Related articles on Designing Buildings Wiki
- 2016 Natural Stone Awards.
- Choosing stone.
- Defects in stonework.
- Kentish ragstone.
- Limestone for building.
- Natural stone.
- Natural stone cladding.
- Natural Stone for Interiors.
- Natural stone tiles.
- Portland Stone.
- Surface Design Show 2017.
- Sustainable stone.
- Types of stone.
[edit] External references
- Stone Federation, Selecting the Correct Stone.
Featured articles and news
Listed despite problems with its design.
Zen and the art of cycling exploration.
Design Council Homes Taskforce launched
To support government 1.5 million homes target within UK climate commitments.
The story of this knowledge quarter building.
In ecology, in hydrology, in biology and in architecture.
Creating environments that promote physical, mental, and social well-being.
UK cases of neutral current diversion
Research project looks for example contributions.
Overstocking and macro-economics cause a decline.
The 2024 update of the Common Assessment Standard
Demonstrating organisational capability’ to fulfil roles under the Building Safety Act.
56 recommendations for a better built environment
Published by the CIC ahead of the King’s Speech.
SkillELECTRIC Top 8 Competitors Named
in annual search for the UK’s best student electrician.
CIOB Diversity and Inclusion technical information sheet
Step-by-step guide on implementing D and I practices.
Conservation and the Indian City. Book review.
Reversibility in conservation ethics
Learning from painting conservation.
Where It's AT Podcast launched!
New CIAT Architectural Technology Podcast goes live.